Connector fitting adapter kit for 1/2" to 3/4" PVC pipe meditation pyramid

Description

Pyramid
Connector Kit
1/2" to 3/4" Pipe Adapters
Offered is one 16 piece set of adapters for the 1/2" PVC pipe pyramid base fittings and apex connectors used for constructing any of the PVC pyramid designs (Russian, Nubian and/or Giza) offered by this seller on other Ebay pages.
These adapters are for anyone who is purchasing or has previously purchased a set of pyramid base and apex fittings from one of my other Ebay pages and would like to use 3/4"
Schedule 40
PVC pipe instead of 1/2"
Schedule 40
PVC pipe .
(The picture provided of pyramid base and apex fittings is for pictorial demonstration only and are not supplied with this offering.)
The adapter fittings are designed as a press/slip fit for assembly and subsequent gluing into 3/4" ID PVC pipe.
Basic assembly instructions will be provided with each set of adapters.
TIP #1:
If you want to remove the ink lettering on the pipe you acquire, the easiest method is with a paper towel or cloth rag using acetone to wipe it off. Be sure to do this outdoors or with plenty of ventilation as the acetone surely will offend your nose.
TIP #2:
If you have pipe that is a bit smaller in ID than the adapters (this may happen when using pipe manufactured by other than JM Eagle and even with JM Eagle ) you can heat the first 1 to 2 inches of the pipe in boiling water until slightly softened and then press the cold adapters into place. Let the assembly cool down, if needed, remove the adapters and then glue them in place prior to final assembly of your pyramid.
If you require more pyramid adapter sets than are currently listed, please make contact to arrange for the quantity you need.
All pyramid parts supplied are proudly manufactured in the USA
.